It is estimated that every household could easily save 100-150 gallons of water each day if the following suggestions were implemented:
1. Check for leaks. A dripping faucet can allow up to two gallons per hour to be wasted. Toilets are also prime suspects. To check, simply drop some food colouring into the tank (not the bowl) and wait 15 minutes. If coloured water shows up in the bowl, you have a leaker.
2. Use water-saving shower heads and faucets. High-flow shower heads spew water out at 6-10 gallons a minute. Flow restriction devices can cut the flow in half without reducing pressure.
3. Water your lawn and plants early in the day. This practice will reduce the loss of water due to evaporation. Late watering also reduces evaporation. During the summer, water your plants slowly and infrequently. Consider drip irrigation for garden areas, which help add water just where it is needed.
4. Use a pistol-grip nozzle on your hose. When washing your car, you can easily shut off the water after each hosing. Remember, a full-open hose can discharge upwards of 50 gallons of water in just 5 minutes.
5. Don’t let faucets run continuously. This is especially true when shaving, brushing your teeth and rinsing the dishes. An open faucet allows 5 gallons to pass in as little as 2 minutes.
6. Review your toilets’ water consumption. Don’t use your toilets as an ashtray or wastebasket. Flushing gallons of water for these purposes is very wasteful. Old toilets use 3-5 gallons per flush; new toilets are low-flow (1.6 gallons per flush) models to help conserve water.
From Housemasters.com Copyright © HMA Franchise Systems, Inc.
0 Responses to “Some tips on household water conservation”